Introduction
At this time, the only form of the new CLA that has been effective in creating interest is the one that is made up of one hundred percent electric components. Just this exact model of the car has been made available to the general public; there is no other variant available. Information on the new high-tech hybrid CLA autos that will be available for purchase in the European market is now being disseminated by Mercedes-Benz.
This information includes the cost that is anticipated to be incurred by the car in the future. Components that are featured in the vehicle include an electric drive, a new eight-speed dual clutch gearbox (8F-eDCT) with an integrated electric motor, and a gasoline engine that is a member of the FAME engine family and has four cylinders and a displacement of 1.5 liters. Each and every one of these components is included into the automobile. One of the extra features of the car is that it is equipped with an electric powertrain. Without exception, each and every one of these components is integrated into the automobile in some kind or another.
CLA Hybrid
Over the course of its lifespan, the lithium-ion battery is capable of storing energy that is equivalent to one and a half kilowatt-hours of electricity. Regarding the quantities that they are able to store, these are the greatest amounts that they are capable of holding. In light of the fact that it has a mix of characteristics, it is not completely out of the question for the CLA Hybrid to be able to drive exclusively on electricity, sail entirely on electricity, and recover energy throughout all eight speeds.
Due to the fact that it is equipped with this integrated function, which is the reason for this feature, this is the reason why it is made available to customers. The idea of driving a car that is powered only by electricity is not inconceivable when considering the context of urban traffic, and the circumstances in which such a vehicle might function are not in any way absurd.
The Engine Details
with the internal combustion engine and the electric motor are both capable of providing torque at a wide variety of speeds, they are able to do so with preserving the same level of efficiency within the system in which they are installed. That being said, this is true irrespective of the velocity at which the torque is imparted.
A conventional pinion starting mechanism is not required since the combustion engine may be started in its whole by using an electric motor and a separating clutch in the event that it is required. The start-stop function and the engine change are almost completely imperceptible to the driver while they are running the vehicle, despite the fact that the driver is the one who is in command of the vehicle.
CLA 180 Hybrid
There is already an installation in place, and both of these components are a part of that installation. It is anticipated that the CLA 180 Hybrid will use between 4.9 and 5.4 liters of gasoline for every 100 kilometers driven, and that it will generate between 111 and 123 grams of carbon monoxide for every kilometer traveled. The manufacturer has provided their best guesses, which are the basis for these values.
The quantity of fuel that the vehicle uses is reflected in these figures, which are accordingly accurate. It is relevant to those who are located in Germany and have a permanent residence there. The first price on the list is 46,243 euros, and it is applicable to such individuals. The initial price for leasing for individual clients is three hundred and twenty-five euros per month. This is the starting pricing.
Cylinder Details
According to the specifications of this particular automobile, the internal combustion engine that is used is a Mercedes-Benz four-cylinder in-line gasoline engine that has a displacement of 1.5 liters. Mercedes-Benz has just begun manufacture of this engine, which is designed to be one that is not only efficient but also effective. The engine is intended to be a hybrid of efficiency and effectiveness. This engine’s development has just recently begun to get attention from the firm.
Both the Miller cycle, which serves as the basis for the combustion process that it utilizes, and the technique that it employs itself are based on the Miller cycle itself. The intake valves are closed relatively early, which results in a large decrease in the amount of throttling losses. This, in turn, makes it feasible to reach a compression ratio of 12:1, which is a major improvement.
FAME details
This specific engine, which is known as M 252, is not only a member of the FAME (Family of Modular Engines) family of modular engines, but it is also capable of being utilized in a wide range of autos owing to the adaptability that it has. In other words, it is a modular engine. Nanoslide is often used to the cylinder liners of a FAME unit, and the crankcase of the unit is typically made fully out of aluminum on a regular basis.
All of these components are included in the package. The fact that the manifold is partially included is an extra property that acts as a separate feature. It is possible to swap one of these two characteristics for the other in a number of different occasions.
One Box
In the event that the exhaust system is constructed in a configuration that is referred to as a “one-box,” it is deliberately positioned in close proximity to the engine during the whole of the building process. When it comes to regulations concerning emissions, this design was developed with the purpose of assuring compliance with any limits that may be adopted in the future.
The exhaust system, which is located in close proximity to the engine, and the small charge air duct, which is located inside the vehicle, are two more distinctive characteristics of the automobile. In the event that the Content License Agreement (CLA) is made available for purchase to the general public for the very first time, customers will have the chance to choose among three different levels of performance on the basis of their preferences.
Power Details
Every individual receives an additional 22 kW of power as a consequence of the electric motor that is being made available to them. This is a significant increase in power. This stimulation is brought about by the electric motor, which is accountable for it. You have the ability to choose from front-wheel drive or all-wheel drive for your car when you have the 4MATIC system incorporated into it.
There are two choices available to you, and you may choose any one of them. Given the two choices that are available to you, you are free to choose any one of them at your own discretion. An overview of the following is presented in the following description, which is meant to serve as a synopsis of the following:
MBUX
An artificial intelligence system that is compatible with the most current fourth generation of MBUX infotainment technology has been developed via a collaborative effort between Microsoft and Google. Two different firms worked together to develop this technology at the same time. Both of these methods are easy to understand. Both of these approaches are open to consideration. It is possible to choose any of these two avenues of action.
At this point in time, the Distronic distance aid function is regarded to be a component that is considered to be standard. This feature is included in each and every model of the CLA that is sold in Europe.
CLA
The CLA has been improved with new features, one of which is the aid for automatically changing lanes in the event that it is essential to do so under specific situations. This is one of the new features that includes the enhancements. Moreover, additional functions have been included into the product.
Because of this capacity, changing lanes is as easy as pushing the indication lever with a single click. This makes the operation far less complicated than it would otherwise be. On account of this, the procedure is far more convenient than it would have been in any other circumstance.
Super Screen
Each and every variant of the CLA comes standard with a massive panoramic roof, which is one of the most fundamental pieces of equipment that is included in the vehicle. This standard functionality is present in each and every model from the beginning. This fixed glass roof is a single piece that extends from the front of the car to the rear of the vehicle, commencing at the frame of the windshield and going all the way to the back of the vehicle.
Conclusion
It encompasses the whole length of the automobile. A single item that is fastened to the outside of the vehicle is what it is described as. It is a piece of equipment that can be purchased. To provide a more precise definition, it is a piece of equipment that may be purchased by independent means.
All of these displays are almost the same size. Each and every one of these displays is capable of being hidden. This is something that does have the potential to be done via the use of a huge glass surface. You may be able to see that the whole collection of exhibits is concealed behind the glass surface if you look closely enough and pay close enough attention.
